SPS-1D Solar Power Supply
For PRT 1200 Transmitter
The SPS-1D Solar Power Supply provides a power source for times when a 120VAC or 12VDC power supply is not be available at the meter for the PRL-1200 Wireless Pulse Link’s PRT-1200 Transmitter. The SPS-1D Solar Power Supply includes everything you need to implement a solar-powered PRT-1200 Pulse Radio Transmitter at the meter:
- Solar Panel
- Solar Panel Mounting Bracket
- Charge Controller
- Battery
- NEMA 4X Enclosure
A full battery charge results in an excess of two weeks of operation of the PRT-1200. All components, except the solar panel, mount inside a 12” X 10” X 6” NEMA 4X fiberglass enclosure providing and rain-tight and dust-tight environment, pre-wired for a truly quick and convenient implementation. The PRT-1200’s base unit, the PRT-12-12VDC (sold as part of the PRL-1200 System) mounts in the enclosure also. Installation is quick and easy. Simply mount the enclosure and solar panel on the supplied bracket. Then make the connections of the solar panel to the charge controller and the pulse output of the meter to the Base Unit.
Specifications
Electrical | |
---|---|
Power Input: | 10 Watt Solar Panel |
Output Voltage: | 12 VDC |
Charge Current: | 500 mA Max |
Battery Capacity: | 12 Amp-hour |
Battery Discharge Rate: | 6 mA |
Battery Recharge Time: | Approximately 6 hours |
Mechanical | |
---|---|
Mounting: | Any position for enclosure; Properly oriented for solar panel |
Enclosure Material and Rating: | Fiberglass NEMA 4X |
Enclosure Size: | 12" wide, 10" high, 6" deep |
Weight: | 2 pounds |
Temperature | |
---|---|
Temperature Range: | -38º C to +70º C, -38.4º F to +158º F |
Humidity: | 0 to 98% non-condensing |
All specifications are subject to change without notice.